TM 9-2320-272-24-4
5-41. TRANSMISSION TORQUE CONVERTER MAINTENANCE (Contd)
1.
Tilt transmission (7) to horizontal position, with oil pan (6) facing downward.
CAUTION
Torque converter must be installed straight on transmission and
not moved from side to side. Side movement will damage hook-
type seal ring on turbine shaft.
NOTE
Assistant will help with step 2.
2.
Install torque converter (5) in transmission (7). Ensure seal ring is properly positioned. Torque
converter (5) may be rotated until flat sides of pump hub engage flats in oil pump drive gear.
3.
Install converter retaining strap (3) on transmission (7) with four screws (4), washers (2), and nuts (1).
5-298
