TM 9-2320-272-24-3
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M925/A1/A2, M928/A1/A2, M929/A1/A2,
LO 9-2320-272-12
M930/A1/A2, M932/A1/A2, M936/A1/A2
TM 9-232-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Hydraulic oil reservoir drained (para. 4-188).
Two locknuts (Appendix D, Item 306)
GENERAL SAFETY INSTRUCTIONS
Six tiedown straps (Appendix D, Item 690)
Cap and plug set (Appendix C, Item 14)
Do not cross hoses when installing.
Plug all openings to prevent dirt from entering and damaging
components.
NOTE
Remove and discard tiedown straps holding hoses to vehicle.
Have drainage container ready to catch oil.
Perform steps 1 through 4 for all vehicles except M936/A1/A2.
1.
Holding filter adapter (10), loosen hose nut (9) and disconnect hose (7) from hydraulic oil reservoir (1).
2.
Remove nut (8), screw (4)`, and clamp (5) from mounting bracket (6).
3.
Loosen hose nut (3) and disconnect hose (7) from reservoir elbow (2).
4.
Remove hose (7) from reservoir (1).
NOTE
Clamp brackets remain attached to frame rail.
5.
Remove two locknuts (14), screws (12), and two pairs of hose clamps (13) from right frame rail (11)
and two hydraulic hoses (15). Discard locknuts (14).
4-858
