TM 9-2320-272-24-3
NOTE
Perform steps 3 and 4 for all vehicles except M936/A1/A2.
3.
Connect hydraulic hose (6) to elbow (2) and adapter (1).
4.
Install hose (6) on mounting bracket (5) with clamp (4), screw (3), and nut (7).
5.
Using care not to bend tube (10), connect hose (11) to elbow (12) and tube (10).
6.
Using care not to bend tube (9), connect hose (8) to tube (9) and control valve elbow (16).
7.
Connect two hose ends (23) as tagged to two control valve elbows (21).
Do not cross hoses during installation. Crossing hoses may result
in injury to personnel.
8.
Connect two hose ends (13) to two elbows (14).
9.
Position two pairs of clamps (16) on hoses (19) and install clamps (16) on two brackets (20) with two
screws (15) and new locknuts (17).
10.
Install six tiedown straps (18) as necessary over two hoses (19).
4-862