TM 9-2320-272-24-3
THIS TASK COVERS:
a. Removal
d. Assembly
e. Installation
b. Disassembly
c . Cleaning, Inspection, and Repair
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M936/A1/A2
LO 9-2320-272-12
TM 9-2320-272-10
TOOLS
TM 9-2320-272-24P
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
MATERIALS/PARTS
Parking brake set (TM 9-2320-272-10).
Two locknuts (Appendix D, Item 291)
Floodlight assembly removed (TM 9-2320-272-102
Three cap and plug sets (Appendix C, Item 14)
Fuel can bracket removed (para. 4-187).
Antiseize tape (Appendix C, Item 72)
Hydraulic oil filter housing removed (para. 4-186).
Drycleaning solvent (Appendix C, Item 71)
Hydraulic oil reservoir drained (para. 4-188).
PERSONNEL REQUIRED
Two
CAUTION
When disconnecting hydraulic lines and hoses, plug all openings to
prevent dirt from entering and causing damage to parts.
NOTE
Have drainage container ready to catch oil.
1.
Disconnect hydraulic oil return hose (6) from adapter elbow (7).
2.
Remove two locknuts (1) and screws (2) from two oil reservoir retaining straps (4). Discard
locknuts (1) and separate straps (4) from hydraulic oil reservoir (3).
NOTE
Assistant will help with step 3.
3.
Remove hydraulic oil reservoir (3) from two oil reservoir brackets (5).
NOTE
If a new hydraulic oil reservoir is to be installed, perform step 4.
4.
Remove oil gauge (8), filter screen (9), two pipe plugs (10) and (13), adapter elbow (7), and
drainvalve (11) with pipe plug (12) from oil reservoir (3).
Remove oil gauge (8) and filter screen (9) from top of oil reservoir (3).
1.
2.
Remove adapter elbow (7), drainvalve (11), and pipe plugs (10) and (13) from oil reservoir (3).
3.
Remove pipe plug (12) from drainvalve (11).
4-898
