TM 9-2320-272-24-2
1.
Install utility chain on two lifting brackets (23).
2.
Install lifting device on chain. Raise lifting device enough to remove slack from chain.
3.
Remove three screws (28), lockwashers (29), and transmission mounting bracket (31) from
transmission (32) and isolator (30). Discard lockwashers (29).
4.
Remove two locknuts (36), washers (35), and back plate (34) from studs (37) and crossmember (33).
Discard locknuts (36).
5.
Remove two screws (25), washers (24), and isolators (26) from right engine mount bracket (27).
6.
Remove two locknuts (38), washers (39), screws (40), and isolators (42) from left engine mount
bracket (41). Discard locknuts (38).
4-75
