TM 9-2320-272-24-2
18.
Loosen clamp (20) and remove fuel return line (19) from fuel pump (1).
19.
Remove screw (17), bracket (18), and fuel return line (19) from gearcase housing (21).
20.
Full sleeve (15) away from socket (16), and remove accelerator linkage (14) from throttle control
lever (2).
21.
Remove spring (11) from modulator cable (8) and bracket (3).
22.
Remove cotter pin (6), washer (7), and modulator cable (8) from throttle control lever (2).
Discard cotter pin (6).
23.
Remove two locknuts (4), U-bolt (10), two shims (5), and modulator cable (8) from bracket (3).
Discard locknuts (4).
24.
Remove nut (13), washer (12), and screw (9) from modulator cable (8).
25.
Remove cotter pin (30), washer (31), and emergency stop cable (26) from fuel pump bracket (22).
Discard cotter pin (30).
26.
Remove screw (23), sleeve (24), and screw (25) from emergency stop cable (26).
27.
Remove screw (29), clamp (27), and emergency stop cable (26) from bracket (28).
NOTE
Have drainage container ready to catch oil.
28.
Disconnect power steering inlet line (35) from power steering pump (33).
4-70
