TM 9-2320-272-24-2
3-304. FRONT CAB MOUNT REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
MATERIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
All
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Locknut (Appendix D, Item 294)
Two insulators (Appendix D, Item 261)
NOTE
This procedure applies to both right and left front cab mounts.
a. Removal
1.
Turn jacking screw (9) until cab weight is supported.
2.
Remove locknut (7), washer (6), and insulator lower half (5) from cab bracket (1). Discard locknut (7)
and insulator (5).
3.
Remove screw (2), washer (3), and insulator upper half (4). Discard insulator (4).
b. Installation
1.
Place new insulator upper half (4) between cab bracket (1) and frame bracket (8).
2.
Install washer (3) and screw (2) on insulator upper half (4), cab bracket (1), and frame bracket (8).
3.
Install new insulator lower half (5) on screw (2) with washer (6) and new locknut (7).
4.
Turn out jacking screw (9) until it is secured all the way down.
3-800
