TM 9-2320-272-24-2
3-302. TOOLBOX AND STEPS REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Fourteen locknuts (Appendix D, Item 313)
Two locknuts (Appendix D, Item 291)
a. Removal
1.
Remove two locknuts (2), screws (13), and drainvalve bracket (1) from toolbox with step (3). Discard
locknuts (2).
2.
Remove two locknuts (10), screws (12), and toolbox support bracket (11) from toolbox with step (3).
Discard locknuts (10).
3.
Release latch (4) and open toolbox door (9).
4.
Remove four locknuts (7), screws (5), washers (6), toolbox (18), and step (3) from hangers (8).
Discard locknuts (7).
5.
Remove two screws (17) and washers (16) from step (3) and toolbox (18).
6.
Remove eight locknuts (14), screws (15), and step (3) from toolbox (18). Discard locknuts (14).
b. Installation
1.
Install step (3) on toolbox (18) with eight screws (15) and new locknuts (14).
2.
Install step (3) on toolbox (18) with two screws (17) and washers (16).
3.
Install toolbox (18) with step (3) on top of hangers (8) with four washers (6), screws (5), and new
locknuts (7).
4.
Install toolbox support bracket (11) on toolbox (18) with step (3) with two screws (12) and new
locknuts (10).
5.
Install drainvalve bracket (1) on toolbox (18) with step (3) with two screws (13) and new lock-
nuts (2).
3-796
