TM 9-2320-272-24-2
3-306. CAB INSULATION REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
l Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Driver's seat removed (left rear upper insulation
l
Adhesive (Appendix C, Item 6)
NOTE
All insulation is removed the same way except where noted.
l
This procedure covers replacement of left upper and engine
access cover panels only.
Clean all insulating material and adhesive from contact area.
l
a. Removal
1.
Pull left rear upper panel insulation (2) away from cab (1) interior.
2.
Remove four screws (6) and washers (5) from engine access cover (4).
3.
Pull engine access cover insulation (3) away from engine access cover (4).
b. Installation
1.
Apply adhesive to foam side of insulation (2) and (3) and install on cab (1) interior and engine access
cover (4).
2.
Install four washers (5) and screws (6) on engine access cover (4).
3-804