TM 9-2320-260-34-2
APPENDIX E (Contd)
MATERIALS
ITEM
DESCRIPTION
NO.
REQ'D
NSN
1
Bolt: MS16922-610
3
1
Bolt: MS16992-609
4
5306-00-412-9770
1
Bolt Guide: 5-7/16 x 1-1/2 x 1-1/4, MS14296H389
6
2
Bolt Guide Support:
8
3/8 x 1-1/2 x 1-1/4, MS14296H403
2
2
Cover, Rear Bearing 7346759
3110-00-734-6759
1
Gage Support: 1-1/2 x 1-1/8 x 3/16, MS14296H369
7
Nut: MS51922-53
5
4
1
Screw, Cap, Socket Head: MS16997-70
6
PROCEDURE:
1. Assemble intermediate shaft adjusting fixture using materials and diagram above.
2. Thread upper nut (5) onto bolt (3). Thread bolt (3) into bolt guide (6) and gage support (7).
Thread lower nut (5) onto bolt (3).
3. Thread upper nut (5) onto bolt (4). Thread bolt (4) into bolt guide (6). Thread lower nut (5) onto
bolt (4).
4. Attach two bolt guide supports (8) to cover (2) with six socket head capscrews (1).
Figure E-4 (Contd). Intermediate Shaft Adjusting Fixture.
E-6