TM 9-2320-260-34-2
Section IV. TRANSMISSION POWER TAKEOFF MAINTENANCE
16-39. TRANSMISSION POWER TAKEOFF MAINTENANCE INDEX
PAGE
PARA.
TITLE
NO.
NO.
Transmission Power Takeoff Replacement
Transmission Power Takeoff Repair
16-40. TRANSMISSION POWER TAKEOFF REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
All
LO 9-2320-260-12
TM 9-2320-260-20
TOOLS
TM 9-2320-260-34P-2
General mechanic's tool kit
EQUIPMENT CONDITION
(Appendix B, Item 1)
Front winch propeller shaft disconnected
q
MATERIALS/PARTS
(if so equipped) (TM 9-2320-260-20).
Seven lockwashers (Appendix D, Item 242)
Hydraulic pump propeller shaft disconnected
q
Gasket (Appendix D, Item 134)
(M817, M820A2) (TM 9-2320-260-20).
Locknut (Appendix D, Item 204)
Front and rear cab tunnel covers removed
q
Cotter pin (Appendix D, Item 48)
(TM 9-2320-260-20).
q Transmission oil drained (LO 9-2320-260-12).
NOTE
Z Perform step 1 for M817 and M820A2 vehicles.
q Perform step 2 for vehicles except M817 and M820A2.
1.
Remove cotter pin (2), pin (4), and control rod (3) from PTO (1). Discard cotter pin (2).
2. Remove screw (7) and lockwasher (6) from PTO (1) and control lever (8). Discard lockwasher (6).
3. Remove locknut (5), screw (9), and control lever (8) from PTO (1). Discard locknut (5).
4.
Remove six nuts (12), lockwashers (11), PTO (1), and gasket (13) from transmission housing (14).
Discard lock washers (11) and gasket ( 13).
NOTE
Perform step 5 if studs are damaged.
5. Remove six studs (10) from transmission housing (14).
16-230
