TM 9-2320-260-34-2
16-9. REAR WINCH LEVEL WIND MAINTENANCE [Contd)
NOTE
Coat all internal parts and bearings with GAA grease before
installation.
8. Install forty-five ball bearings (35) on two races (20) and (21) and place two races (20) and (21) on
trolley frame (33).
9. Install pivot frame (13) on trolley frame (33) with new locknut (31), Install grease fitting (32) in
pivot shaft (15).
10. Install two grease fittings (30) on trolley frame (33).
NOTE
Wheel sets of both axles are installed the same. Left axle wheel set
is shown.
11. Using arbor press, install two bearings (27) on wheels (26).
12. Soak four new felt washers (22) and (28) in lubricating oil.
13. Install two thrust washers (29), felt washers (28), wheels (26), felt washers (22), and washers (23)
on axle (34) with two snaprings (24).
14. Install two grease fittings (25) on ends of axle (34).
16-67
