TM 9-2320-260-34-2
16-9. REAR WINCH LEVEL WIND MAINTENANCE (Contd)
15.
Thread four jamnuts (2) on retainer screws (3).
Install four retainer screws (3) on trolley (1).
16.
Install trolley (1) on track frame (5) and turn four retainer screws (3) through webs of trolley (1)
17.
until ends of retainer screws (3) project under track, but do not touch, frame of track frame (5).
Tighten jamnuts (2).
Install two jamnuts (4) on stopscrews (12).
18.
Install two stopscrews (12) on end plates of track frame (5) to position recorded during disassembly.
19.
Tighten jamnuts (4).
Install trolley poppet (6) and spring (7) on track frame (5) with poppet nut (8).
20.
Install latch (9) on poppet (6) with inner nut (10). Ensure latch (9) allows poppet (7) to engage
21.
trolley (1) when latch (9) is in lock position, but allows trolley (1) to roll freely on track of track
frame (5) when latch (9) is in unlock position.
22.
When poppet movement is correct, install second nut (11) as a jamnut on poppet (6).
e. Installation
Position level wind (15) on winch (16) and install with four new lockwashers ( 13) and screws ( 14).
16-68
