TM 9-2320-260-34-2
15-93. CEILING LIGHT FIXTURES REPLACEMENT (M820A1)
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-260-10
M820A1
TM 9-2320-260-20
TOOLS
TM 9-2320-260-34P-2
General mechanic's tool kit
EQUIPMENT CONDITION
(Appendix B, Item 1)
q External power source disconnected
MATERIALS/PARTS
(TM 9-2320-260-10).
Two insulated wire splices
q Battery ground cable disconnected
(Appendix C, Item 49)
(TM 9-2320-260-20).
q Ceiling light removed (TM 9-2320-260-20).
NOTE
All ceiling light fixtures are replaced the same. This procedure
covers one ceiling light fixture.
1. Remove four screws (3) and center light fixture (2) from ceiling (1).
NOTE
Tag wires, cables, and leads for installation.
2. Disconnect two wires (4) and wires (6) from two insulated wire splices (5). Discard insulated wire
splices (5).
1. Connect two wires (4) to two wires (6) with two new insulated wires splices (5).
2. Install center ceiling light fixture (2) in ceiling (1) with four screws (3).
15-336
