TM 9-2320-260-34-2
I
15-90. ELECTRICAL BOX REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-260-10
M820, M820A1, M820A2
TM 9-2320-260-20
TOOLS
TM 9-2320-260-34P-2
General mechanic's tool kit
EQUIPMENT CONDITION
(Appendix B, Item 1)
q Battery ground cable disconnected
(TM 9-2320-260-20).
q Entrance receptacle removed (para. 15-81).
1. Remove six screws (1) and bracket (2) from electrical box (7) and load center (3).
2. Remove electrical box (7) from end panel (4).
3. Remove grommet (8) from electrical box (7).
4. Remove screw (5) and plate (6) from electrical box (7).
1. Install plate (6) on electrical box (7) with screw (5).
2. Install grommet (8) on electrical box (7).
3. Position electrical box (7) on end panel (4) and install bracket (2) on electrical box (7) and load
center (3) with six screws (1).
Connect battery ground cable (TM 9-2320-260-20).
q
15-332
