TM 9-2320-260-34-2
16-2. FRONT WINCH REPAIR (Contd)
Remove jamnut (26), nut (25), latch (24), bolt (23), spacer (22), spring (21), and shoulder pin (20)
1.
from end frame (2).
2.
Remove pipe plug (7) from end frame (2).
Remove two screws (4), Iockwashers (5), washers (6), and lock (3) from end frame (2). Discard
3.
lockwashers (5).
4.
Remove seal (10) from end frame (2). DiSCard seal (10).
Remove
pipe plug (19) from end frame (2).
5.
Remove
setscrew (18) from shift fork (8).
6.
Remove
setscrew (15), bail (12), and spring (13) from shifter handle (14).
7.
Remove
shifter handle (14) and woodruff key (11) from shifter shaft (16). Discard woodruff key (11).
8.
Remove expansion plug (1) from end frame (2). Discard expansion plug (1).
9.
Using brass drift, drive shifter shaft (16) from shift fork (8) until woodruff key (9) clears shift
10.
fork (8).
Remove woodruff key (9) from shifter shaft (16). Discard woodruff key (9).
11.
12.
Using brass drift, remove shifter shaft (16) from end frame (2).
Remove seal (17) from end frame (2). Discard seal (17).
13.
16-4
