TM 9-2320-260-34-2
15-51. LIFTGATE PLATFORM AND HINGE PLATE MAINTENANCE (M820A2) (Contd)
NOTE
Assistant will help with steps 6 and 7.
6.
Lift platform outer edge and remove support.
7.
Install hinge plate (1) on van floor (5) with two hinge leaves (2), bar nuts (6), four new
Iockwashers (3), and screws (4). Tighten screws (4) 49-55 lb-ft (66-75 Nm).
FOLLOW-ON TASKS:
Grease all lubrication fittings (LO 9-2320-260-12).
Close van doors (TM 9-2320-260-10).
Close platform (TM 9-2320-260-10).
Install van body ladders (TM 9-2320-260-10).
15-203