TM 9-2320-260-34-2
Section IV. DUMP BODY MAINTENANCE
15-11. DUMP BODY MAINTENANCE INDEX
PARA.
PAGE
TITLE
NO.
NO.
Cab Protector Shield Maintenance
Dump Body Maintenance
Roller Arm Maintenance
Hoist Cylinder Maintenance
Hoist Safety Latch Maintenance
Hoist Pump Maintenance
Subframe Replacement
Control Valve Maintenance
Hydraulic Hoses Replacement
Safety Brace Replacement
15-12. CAB PROTECTOR SHIELD MAINTENANCE
I
THIS TASK COVERS:
Installation
c.
a. Removal
b. Cleaning and Inspection
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
TM 9-237
M817
TM 9-2320-260-10
TOOLS
TM 9-2320-260-34P-2
General mechanic's tool kit
EQUIPMENT CONDITION
(Appendix B, Item 1)
Parking brake set (TM 9-2320-260-10).
Lifting device
Two screws (Appendix C, Item 34)
GENERAL SAFETY INSTRUCTIONS
Two nuts (Appendix C, Item 25)
q All personnel must stand clear during lifting
Four washers (Appendix C, Item 57)
operations.
Chain
q Ensure lifting capacity is greater than weight of
Supports
protector shield.
MATERIALS/PARTS
Twelve locknuts (Appendix D, Item 169)
Four cotter pins (Appendix D, Item 20)
1. Attach chain to cab protector shield (1) with two screws (2), four washers (3), and two nuts (4).
2. Attach lifting device to chain.
3. Remove eight locknuts (14), screws (16), and washers (15) from cab protector shield (1) and dump
body (11). Discard locknuts (14).
4. Remove four cotter pins (10), nuts (9), washers (8), washers (6), and screws (5) from cab protector
shield (1) and dump body (11). Discard cotter pins (10).
15-24
