TM 9-2320-260-34-2
15-21. SAFETY BRACE REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
lNITIAL SETUP
APPLICABALE MODELS
REFERENCES (TM)
M817
TM 9-2320-260-10
TM 9-2320-260-34 P-1
MATERIAIS/PARTS
EQUIPMENT CONDITION
General mechanic's tool kit
Parking brake set (TM 9-2320-260-10).
(Appendix B, Item 1)
Dump body in lowered position
MATERIALS/PARTS
(TM 9-2320-260-10).
Lockwasher (Appendix D, Item 224)
a. Removal
1.
Remove nut (4), lockwasher (3), and screw (6) from hinge pin (1) and bracket (2). Discard
lockwasher (3).
2. Using punch and hammer, remove hinge pin (1) from bracket (2).
3. Remove safety brace (5) from bracket (2).
b. Installation
1.
Position safety brace (5) in bracket (2) with hinge pin (1) hole alined with hole in bracket (2),
Insert hinge pin (1) in bracket (2) through safety brace (5) and install with screw (6), new
2.
lockwasher (3), and nut (4).
15-69
