TM 9-2320-260-34-2
15-12. CAB PROTECTOR SHIELD MAINTENANCE (Contd)
5. Remove four locknuts (7), screws (13), and washers (12) from cab protector shield (1) and dump
body (11). Discard locknuts (7).
WARNING
All personnel must stand clear during lifting operations.
q
A shifting or swinging load may cause injury to personnel.
Z Ensure lifting capacity is greater than weight (465 lb (211 kg))
of cab protector shield, Failure to do so may result i n injury to
personnel or damage to equipment,
NOTE
Assistant will help with step 6.
6. Raise cab protector shield (1) away from dump body (11) and lower onto supports,
7. Remove lifting device from chain,
8. Remove two nuts (4), screws (2), four washers (3), and chain from cab protector shield (1).
15-25
