TM9-2320-260-34-1
9-4. TRANSFER REPAIR (Contd)
NOTE
Perform steps 113 and 114 for M815 and M819 vehicles.
113. Install coupling (33) on input shaft (30) with setscrew (31).
114. Install new safety wire (32) on setscrew (31).
NOTE
Perform steps 115 through 118 for M815, M816, and M819
vehicles.
115. Install new gasket (34) and PTO (37) on housing (1) with two new lockwashers (39), nuts (38),
four new lockwashers (35), and screws (36).
116. Install elbow (45) on housing (1).
117. Install two new sleeves (41) and tube (40) on elbow (45) and PTO (37).
118. Install clamp (44) and tube (40) on housing (1) with washer (43) and screw (42).
9-55
