TM 9-2320-260-34-1
9-4. TRANSFER REPAIR (Contd)
1. For general repair instructions, refer to para. 2-10.
2. Housing (8), front cover (9), and front output shaft cover (10) repair:
a. Use care when drilling blind holes to not penetrate base wall.
b. Do not use threaded insert repair if the narrowest wall thickness after preparatory drilling is
less than 3/4 of the new drilled hole diameter.
If stud is necked down or threads on stud are damaged in nut locking area, replace stud. Follow
c.
d. Nicks and scoring in non-fit or non-seal areas do not require repair.
e.
External burrs will be removed to enhance paint retention.
3. Using fine crocus cloth, remove minor scoring and corrosion in cylinder (11).
9-33