TM 9-2320-260-34-1
9-4. TRANSFER REPAIR (Contd)
b. Cleaning and Inspection
1. For general cleaning instructions, refer to para. 2-8.
2. For general inspection instructions, refer to para. 2-9.
3. Inspect bearings (14) and (17) in housing (13) and front cover (7). Refer to TM 9-214. Replace
bearing(s) (14) or (17) and race(s) (subtask c.) if bearing(s) (14) or (17) fail inspection.
4. Inspect housing (13) for breaks, cracks, stripped threads, and wear. Refer to table 9-1, Transfer
Housing and Covers Wear Limits, for measurements. Replace housing (13) if damaged or worn.
5. Inspect friction plug (15) for looseness and evidence of leakage. Replace friction plug (15) if loose
or leaking.
6. Inspect front cover (7) for breaks, cracks, stripped threads, and wear. Refer to table 9-1, Transfer
Housing and Covers Wear Limits, for measurements. Replace front cover (7) if damaged or worn.
7. Inspect front output shaft cover (1) for breaks. cracks. stripped threads, and wear. Refer to table 9-1.
Transfer Housing and Covers Wear Limits, for measurements. Replace front output shaft. cover (1)
if damaged or worn.
WEAR LIMITS/TOLERANCES
ITEM
lTEM/POINT OF MEASUREMENT
NO.
INCHES
MILLIMETERS
16
Input shaft bore
109.995-110.020
4.3305-4.3315
Input shaft bore
18
4.7242-4.7252
119.995-120.020
19
Shifter shaft bore
25.387-25.438
0.9995-1.0015
20
Front axle shifter bore
22.212-22.263
0.8745-0.8765
21
Front axle shaft bore
101.65-101.70
4.002-4.004
9-25
