TM 9-2320-260-34-1
8-6. TRANSMISSION MAINTENANCE (Contd)
21.
Remove cotter pin (18) and nut (1) from output shaft (9) and companion flange (2). Discard cotter
pin (18).
NOTE
Tighten puller screws evenly until companion flange is free from
transmission.
22.
Using flange replacer, remove companion flange (2) and shield (3) from output shaft (9).
23.
Remove four screws (4), lockwashers (5), output shaft cover (6), and gasket (7) from transmission
case (8). Discard gasket (7) and lockwashers (5).
24.
Remove seal (19) from output shaft cover (6). Discard seal (19).
25.
Remove four screws (17), lockwashers (16), countershaft rear cover (15), and gasket (14) from
transmission case (8). Discard gasket (14) and lockwashers (16).
26.
Remove spacer washer (11) from output shaft (9).
27.
Remove cotter pin (13) and nut (12) from countershaft (10). Discard cotter pin (13).
8-18