TM 9-2320-260-34-1
8-6. TRANSMISSION MAINTENANCE (Contd)
38. Remove countershaft front bearing (3) from transmission case (2).
39. Install rope sling on countershaft (1).
40. Install lifting device on rope sling.
WARNING
All personnel must stand clear during lifting operations. A swing-
ing or shifting load may cause injury to personnel.
41.
Remove countershaft (1) from transmission case (2) and lower onto supports.
42.
Remove lifting device from rope sling.
43.
Remove rope sling from countershaft (1).
44.
Remove snapring (8), thrust washer (9), fifth speed gear (7), and fith speed gear sleeve (10) from
mainshaft (5). Discard snapring (8).
45.
Remove pin (11) from fifth speed gear sleeve (10).
46.
Remove fourth speed gear (12) and gear synchronizer (13) from main shaft (5).
47.
Remove snapring ( 14), second/third speed clutch gear (15), second/third speed gear (6), and
first/reverse speed gear (4) from mainshaft (5). Discard snapring (14).
48.
Remove snapring (27) from countershaft (18). Discard snapring (27).
49.
Remove countershaft (18) from countershall drive gear (26).
Remove woodruff key (19) from countershaft (18). Discard woodruff key (19).
50.
51.
Remove snapring (25) from countershaft (18). Discard snapring (25).
Remove countershaft (18) from fourth speed gear (24).
52.
53.
Remove woodruff key (20) from countershaft (18). Discard woodruff key (20).
54.
Remove countershaft (18) from third speed gear (23).
55.
Remove woodruff key (21) from countershaft (18). Discard woodruff key (21).
56.
Remove spacer (16) from countershaft (18).
57.
Remove countershaft (18) from second speed gear (17).
58.
Remove woodruff key (22) from countershaft (18). Discard woodruff key (22).
Remove snapring (30) from input shaft (28). Discard snapring (30).
59.
60.
Remove input shaft ball bearing (29) from input shaft (28).
8-20
