TM 9-2320-260-34-1
7-4. REAR WIRING HARNESS REPLACEMENT (Contd)
NOTE
Steps 5 through 8 apply to M818 vehicles.
5. Place clamp (13) over rear wiring harness (8) and install clamp (13) and two wires (4) on rear
crossmember (1) with screw (2), new lockwasher (3), and new locknut (5).
6. Install two wires (20) on crossmember (18) with screw (16), new lockwasher (19), and new lock-
nut (17).
NOTE
Receptacle cover must be lifted and held open to install top two
screws.
7. Install semi-trailer receptacle (24) and cover (15) on spare tire carrier (25) with four screws (14) and
new locknuts (23).
8. Place clamp (22) over rear wiring harness (8) and install on spare tire carrier (25) with screw (26)
and new locknut (21).
7-33
