TM 9-2320-260-34-1
7-4. REAR WIRING HARNESS REPLACEMENT (Contd)
NOTE
Step 9 through 16 apply to M819 vehicles.
Receptacle cover must be lifted and held open to install top two
screws.
Install trailer receptacle (11) and cover (9) on rear bracket (8) with four screws (10) and new
9.
locknuts (12).
10.
Place clamp (7) over rear wiring harness (13) and install on bracket (5) with screw (6) and new
locknut (4).
Install two wires (1) on rear crossmember (14) with screw (3), new lockwasher (2), and new
11.
locknut (15).
NOTE
Receptacle cover must be lifted and held open to install top two
screws.
12.
Install harness receptacle (31) and cover (29) on body (28) with four screws (30) and new
locknuts (32).
Place clamps (24) and (27) over rear wiring harness (13) and install on rear left fender (34) with two
13.
screws (33), four washers (26), and two new locknuts (25).
14.
Place clamps (21) and (23) over rear wiring harness (13) and install on subframe (20) with two
screws (22) and new locknuts (19).
15.
Place clamp (16) over rear wiring harness (13) and install on clip extension (17) with screw (18) and
new locknut (40).
16.
Install two wires (39) on left frame rail (35) with screw (36), new lockwasher (37), and new
locknut (38).
7-34
