TM 9-2320-260-34-1
7-4. REAR WIRING HARNESS REPLACEMENT (Contd)
NOTE
Receptacle cover must be lifted and held open to install top two
screws.
2. Install trailer receptacle (6) and cover (11) on rear crossmember (1) with four screws (12) and new
locknuts (7).
3. Install two wires (4) on rear crossmember (1) with screw (2), new lockwasher (3), and new lock-
nut (5).
NOTE
Left and right rear composite lights are installed the same. Step 4
covers the left composite light installation.
4. Connect four composite light wires (9) to four harness leads (10).
7-32
