TM 9-2320-260-34-1
7-3. FRONT WIRING HARNESS REPLACEMENT (Contd)
49.
Install ground wire (54) on starter (48) with new lockwasher (55) and nut (56).
50.
Install wire (52) on starter (48) with clip (44) and screw (45).
Install wire (59) on starter (48) with new lockwasher (57) and nut (58).
51.
52.
Place clamps (46) and (50) over front wiring harness (14) and install on left frame rail (49) with
screw (47) and new locknut (51).
53.
Install wire (64) on fuel solenoid (60) with nut (61).
54.
Install wire (65) on fuel return tube (66) with clip (67).
Connect wire (62) to cold start lead (63).
55.
56.
Place clamp (43) over front wiring harness (14) and install on air intake manifold (40) with
washer (68), new lockwasher (41), and screw (42).
57.
Install terminal lug (39) on glow-plug (36) with new lockwasher (38) and nut (37).
7-19
