TM 9-2320-260-34-1
7-4. REAR WIRING HARNESS REPLACEMENT (Contd)
2.
Remove locknut (8), screw (5), and clamp (6) from cab support (7). Discard locknut (8).
3.
Remove clamp (6) from rear wiring harness (15).
NOTE
Steps 4 through 6 apply to vehicles with stoplight switch mounted
on air pack.
4.
Disconnect two wires (3) from stoplight switch (4).
5.
Remove locknut (16), clamp (17), and screw (18) from left frame rail (19). Discard locknut (16).
6.
Remove clamp (17) from rear wiring harness (15),
Steps 7 through 9 apply to vehicles with stoplight switch mounted
on left frame rail.
7.
Disconnect two wires (14) from stoplight switch (11).
8.
Remove locknut (13), clamp (12), and screw (10) from left frame rail (9) and stoplight switch (11).
Discard locknut (13).
9.
Remove clamp (12) from rear wiring harness (15).
7-23