TM 9-2320-260-34-1
7-3. FRONT WIRING HARNESS REPLACEMENT (Contd)
NOTE
Install tiedown straps as required.
2.
Connect connector plug (41) to turn signal switch (40).
Install front wiring harness (14) on steering column (29) with tiedown strap (31), screw (32), and
3.
nut (30).
4.
Connect front wiring harness connector (18) to headlight switch (25).
5.
Connect wires (12), (13), and (15) to battery switch (11).
6.
Connect wires (21) and (22) to ignition switch (23).
7.
Connect wire (17) to preheater indicator (16).
8.
Connect wires (19) and (20) to preheater switch (24).
NOTE
Step 9 applies to M816, M817, and M818 vehicles equipped with
dual fuel tanks.
9.
Connect wires (10) and (33) to fuel selector switch (34).
10.
Connect wires (26) and (27) to circuit breaker (28).
11.
Connect wire (5) to air pressure switch (6).
12.
Connect wire (8) to oil pressure lock-out switch (9).
13.
Connect front wiring harness lead (35) to wire (36).
14.
Connect wire (7) to high beam indicator (37).
Connect wires (3) and (4) to panel lamps (38) and (39).
15.
16.
Connect wire (2) to engine temperature gage (1).
7-14
