TM 9-2320-260-34-1
7-3. FRONT WIRING HARNESS REPLACEMENT (Contd)
17.
Connect wires (13), (14), and (15) to dimmer switch (12).
NOTE
Assistant will help with step 18.
18.
Place clamp (17) over front wiring harness (16) and install on cab floor (18) with screw (11) and
new locknut (19).
19.
Install front wiring harness receptacle (30) on bracket (27) with four screws (31), new lock-
washers (26), and nuts (25).
Connect rear wiring harness receptacle (24) to front wiring harness receptacle (30).
20.
Place clamp (21) over front wiring harness (16) and install on bracket (22) with screw (23) and new
21.
locknut (20).
22.
Connect wire (29) to contact brush cover (28).
Install wires (9) and (10) on terminal (8) with nut (3).
23.
Install wires (4) and (5) on terminal (7) with nut (3).
24.
Install wires (1) and (2) on terminal (6) with nut (3).
25.
7-16