TM 9-2320-260-34-1
7-3. FRONT WIRING HARNESS REPLACEMENT (Contd)
26. Place front wiring harness (16) on clip (51). Bend clip (51).
NOTE
Assistant will help with step 27.
27. Place two grommet halves (43) around front wiring harness (16) and install on firewall (44) with two
screws (52), washers (45), and new locknuts (42).
NOTE
Perform step 28 for M816 and M819 vehicles.
28. Connect wire (64) to wire assembly (63).
29. Connect wires (47), (48), (49), and (50) to two circuit breakers (46).
30. Connect front wiring harness (16) to turn signal flasher (60).
31. Install ground wire (53) on flasher (60) and bracket (36) with screw (54) and new lockwasher (59).
32. Install wires (39), (40), and (41) on relay (61) with three clips (7) and screws (37).
33. Connect front wiring harness (16) to protective control box (62).
34. Install ground wire (57) on control box (62) and bracket (36) with new lockwasher (58), new
lockwasher (56), and screw (55).
35. Install front wiring harness (16) on two clips (35). Bend clips (35).
7-17
