TM 9-2320-260-34-1
7-3. FRONT WIRING HARNESS REPLACEMENT (Contd)
45.
Remove three nuts (37), wires (35), (36), (38), (39), (43), and (44) from terminals (40), (41), and (42).
46.
Disconnect wire (62) from contact brush cover (61).
47.
Remove locknut (53), screw (56), and clamp (54) from bracket (55). Discard locknut (53).
48.
Remove clamp (54) from front wiring harness (11).
49.
Disconnect rear wiring harness receptacle (57) from front wiring harness receptacle (63).
50.
Remove four nuts (58), lockwashers (59), screws (64), and front wiring harness receptacle (63) from
NOTE
Assistant will help with step 51.
51.
Remove locknut (51), screw (45), and clamp (50) from cab floor (52). Discard locknut (51).
52.
Remove clamp (50) from front wiring harness (11).
Disconnect wires (47), (48), and (49) from dimmer switch (46).
53.
7-9