TM 9-2320-260-34-1
7-3. FRONT WIRING HARNESS REPLACEMENT (Contd)
Disconnect wire (12) from blackout headlight (13).
5.
Disconnect Wires (1) and (2) from left. headlight (3).
6.
Remove locknut (7), clamp (6), wire (4), two lockwashers (8), and screw (11) from left fender (10).
7.
Remove clamp (6) from front wiring harness (5).
8.
9.
Bend open three clips (9) and remove front wiring harness (5) from clips (9).
10.
Remove nut (38) and wire (41) from fuel solenoid (37).
11.
Remove wire (42) from clip (44) on fuel return tube (43).
12.
Disconnect wire (40) from cold start lead (39).
13.
Remove screw (20), lockwasher (19), clamp (21), and washer (45) from air intake manifold (18).
Discard lockwasher (19).
14.
Remove clamp (21) from front wiring harness (5).
15.
Remove nut (15), lockwasher (16), and terminal lug (17) from glow-plug (14). Discard lock-
washer (16).
7-4