TM 9-2320-260-34-1
7-3. FRONT WIRING HARNESS REPLACEMENT (Contd)
Disconnect wires (2) and (3) from horn solenoid (1).
34.
Bend open two clips (4) and remove front wiring harness (11).
35.
36.
Remove three screws (6), clips (7), and wires (8), (9), and (10) from relay (31).
37.
Remove screw (25), lockwashers (26) and (28), and ground wire (27) from protective control box (32)
and bracket (5). Discard lockwashers (28) and (26).
Disconnect front wiring harness (11) from protective control box (32).
38.
Remove screw (24), ground wire (23), and Iockwasher (29) from turn signal flasher (30) and
39.
bracket (5). Discard lockwasher (29).
Disconnect front wiring harness (11) from turn signal flasher (30).
40.
41.
Disconnect wires (17), (18), (19), and (20) from two circuit breakers (16).
NOTE
Perform step 42 for M816 and M819 vehicles.
Assistant will help with step 42.
Disconnect wire (34) from wire assembly (33).
42.
43.
Remove two locknuts (12), washers (14), screws (22), and grommet (13) from firewall (15). Discard
locknuts (12).
44.
Bend open clip (21) and remove front wiring harness (11).
7-8
