TM 9-2320-260-34-1
7-3. FRONT WIRING HARNESS REPLACEMENT (Contd)
Disconnect wires (8) and (7) from right headlight (6).
21.
22.
Remove locknut (15), screw (10), clamps (16) and (18), ground wire (11), and two lockwashers (13)
from right fender (17) and brace (12). Discard locknut (15) and lockwashers (13).
23.
Remove clamps (16) and (18) from front wiring harness (14).
24.
Remove locknut (19), screw (9), and clamp (20) from front crossmember (21). Discard locknut (19).
25.
Remove clamp (20) from front wiring harness (14).
26.
Bend open clip (22) and remove front wiring harness (14).
27.
Remove two screws (4) and lockwashers (3) from terminal cover (5) and alternator (23). Discard
lockwashers (3).
28.
Pry terminal cover (5) away from sealing compound and remove cover (5) from alternator (23).
29.
Remove two screws (31), lockwashers (32), retaining strap (30), and spacer plates (29) and (30) from
alternator (23). Discard lockwashers (32).
NOTE
All sealing compound must be removed prior to removing wires.
Disconnect lead (24) from wire (25).
30.
31.
Remove screw (28), lockwasher (27), and ground wire (26) from alternator (23). Discard lock-
washer (27).
Remove nut (35), lockwasher (34), and positive wire (33) from alternator (23). Discard lock-
32.
washer (34),
Disconnect wire (1) from temperature sending unit (2).
33.
7-6
