TM 9-2320-260-34-1
7-3. FRONT WIRING HARNESS REPLACEMENT (Contd)
NOTE
Left and right composite lights are connected the same. Steps 1
through 4 cover the left side harness removal.
Tag all leads for installation.
Remove and discard tiedown straps as required.
1. Pull front wiring harness (4) from behind protective cover (9).
2. Disconnect three harness wires (6) from composite light wires (7).
3. Remove two locknuts (3), clamps (2) and (5), and two screws (1) from left fender (8). Discard lock-
nuts (3).
4. Remove clamps (2) and (5) from front wiring harness (4),
7-3
