TM 9-2320-260-34-1
3-43. FLYWHEEL HOUSING REMOVAL
THIS TASK COVERS:
Removal
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-260-34P-1
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit
Flywheel and clutch removed (para. 3-42).
(Appendix B, Item 1)
Soft-head hammer (Appendix B, Item 47)
1.
Remove seven screws (8), lockwashers (9), and washers (10) from flywheel housing (4) and oil
pan (11). Discard lockwashers (9).
2. Remove nine screws (1), lockwashers (2), washers (3), and preformed packings (12) from flywheel
housing (4) and cylinder block (7). Discard lockwashers (2) and preformed packings (12).
3. Using a soft-head hammer, tap flywheel housing (4) from two dowels (5) and remove flywheel
housing (4) from cylinder block (7).
4.
Remove gasket (6) from flywheel housing (4). Discard gasket (6).
5. Remove pipe plugs (13) and (14) from flywheel housing (4).
6. Remove two screws (17), access cover (16), and gasket (15) from flywheel housing (4). Discard
gasket (15).
7. Remove dowels (5) from cylinder block (7) only if dowels (5) are cracked or bent.
