TM 9-2320-260-34-1
3-38. FUEL CROSSOVER CONNECTORS REMOVAL
THIS TASK COVERS:
Removal
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-260-34P-1
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit
Engine mounted on repair stand (para. 3-29).
(Appendix B, Item 1)
MATERIAL.S/PARTS
Cap and plug set (Appendix C, Item 6)
NOTE
All fuel crossover connectors are removed the same. This proce-
dure covers removal of one fuel crossover connector.
1. Remove four screw-assembled lockwashers (1), fuel crossover connector (2), and four O-rings (5) from
cylinder heads (3). Discard screw-assembled lockwashers (1) and O-rings (5).
2. Plug four fuel holes (4) in cylinder heads (3).
