TM 9-2320-240-34-1
3-40. CYLINDER HEADS REMOVAL
THIS TASK COVERS:
Removal
INITIAL SHOP
APPLICABI.E MODELS
REFERENCES (TM)
All
TM 9-2320-260-34P-1
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit
(Appendix B, Item 1)
NOTE
All cylinder heads are removed the same. This procedure is for
one cylinder head.
Tag each cylinder head for installation.
1.
Following cylinder head loosening sequence, remove twelve screws (1) and washers (2) from cylinder
head (3).
2. Remove cylinder head (3) and gasket (4) from cylinder block (5). Discard gasket (4).
NOTE
For disassembly, cleaning, inspection, repair, and assembly, refer