TM 9-2320-260-20
Section IV. MOUNTING KITS MAINTENANCE
PARA.
PAGE
TITLE
NO.
NO.
Machine Gun Mount Kit Maintenance
Decontamination Mounting Kit Replacement
Rifle Mounting Kit Replacement
Fire Extinguisher Mounting Kit Replacement
THIS TASK COVERS:
a. Removal
c. Bracket Post Assembly
b. Bracket Post Disassembly
d. Installation
INITIAL SETUP
APPLICABLE MODELS
EQUIPMENT CONDITION
All (except M815, M820, M820A1, M820A2)
Parking brake set (TM 9-2320-260-10).
Cab top removed, (task d only); hardtop
MATERIALS/PARTS
Thirty-two locknuts
GENERAL SAFETY INSTRUCTIONS
Two cotter pins
Bracket posts must be held in position before
PERSONNEL REQUIRED
removing U-bolts.
Two
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-20P
1. Remove twelve locknuts (5), screws (2), and twenty-four washers (3) from ring mount (1),
adapter (4), and right front and rear bracket posts (6) and (7). Discard locknuts (5).
NOTE
Assistant will help with steps 2 through 4.
2. Remove ring mount (1) from adapter (4) and right front and rear bracket posts (6) and (7).
14-62
