TM 9-2320-260-20
I
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
EQUIPMENT CONDITION
APPLICABLE MODELS
Parking brake set (TM 9-2320-260-10).
All
Decontamination apparatus removed
MATERIALS/PARTS
(TM 3-4230-204-12&P).
Eight locknuts
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-20P
TM 3-4230-204-12&P
1. Remove five locknuts (9), screws (6), ten washers (7), support bracket (2), and brace (5) from
fender (10). Discard locknuts (9).
2. Remove locknut (4), washer (3), and brace (5) from support bracket (2) and stud (14). Discard
locknut (4).
3. Remove two straps (1) from bracket (13) and support bracket (2).
4. Remove two locknuts (8), screws (11), washers (12), and bracket (13) from support bracket (2).
Discard locknuts (8).
1. Install bracket (13) on support bracket (2) with two washers (12), screws (11), and new locknuts (8).
2. Install two straps (1) on bracket (13) and support bracket (2).
3. Install brace (5) on support bracket (2) and stud (14) with washer (3) and new locknut (4). Finger
tighten locknut (4).
4. Position support bracket (2) and brace (5) on fender (10) and install with five screws (6), ten
washers (7), and five new locknuts (9).
5. Tighten locknut (4).
14-68
