14-33. MACHINE GUN MOUNT KIT MAINTENANCE (Contd)
b. Bracket Post Disassembly
NOTE
Steps 1, 2, and 3 are identical for removing ammunition trays from
both right-front bracket post and left-rear bracket post. This proce-
dure is for disassembly of right-front bracket post.
1.
Remove two straps (16) from ammunition tray (17).
2.
Remove four locknuts (11), washers (12), screws (14), and ammunition tray (17) from right-front
bracket post (3). Discard locknuts (11).
3.
Remove four locknuts (19), washers (18), screws (20), and two tray brackets (13) from ammunition
tray extensions (15). Discard locknuts (19).
4.
Remove four locknuts (24), screws (21), eight washers (22), and adapter (23) from left-rear bracket
post (1). Discard locknuts (24).
c. Bracket Post Assembly
NOTE
Steps 1, 2, and 3 are identical for assembling ammunition trays
from both right-front bracket post and left-rear bracket post. This
procedure is for disassembly of right-front bracket post.
1. Install two tray brackets (13) on ammunition tray extensions (15) with four screws (20),
washers (18), and new locknuts (19).
2. Install ammunition tray (17) on right-front bracket post (3) with four screws (14), washers (12),
and new locknuts (11).
3. Install two straps (16) on ammunition tray (17).
4. Aline adapter (23) with first four holes in left-rear bracket post (1) and install adapter (23) with four
screws (21), eight washers (22), and four new locknuts (24). Finger tighten locknuts (24).
14-65
