CAB DOOR WINDOW REGULATOR AND HANDLE REPLACEMENT

TM 9-2320-260-20

11-18. CAB DOOR WINDOW REGULATOR AND HANDLE REPLACEMENT

THIS TASK COVERS:

c. Window Regulator Installation

a. Window Regulator Handle Removal

b. Window ReguIator Removal

d. Window Regulator Handle Installation

INITIAL SETUP

APPLICABLE MODELS

EQUIPMENT CONDITION

q Parking brake set (TM 9-2320-260-10).

q Cab door glass removed (para. 11-17).

REFERENCES (TM)

TM 9-2320-260-10

TM 9-2320-260-20P

a. Window Regulator Handle Removal

Remove screw (6), window regulator handle (5), and washer (4) from cab door window regulator (7).

NOTE

Cab door window regulator must be supported as last screw is

removed.

1. Remove four screws (3) from inner door panel (2) and cab door window regulator (7).

2. Slide regulator arm stud (8) out of stationary track (9) and remove cab door window regulator (7)

through cab door (1).

1. Position window regulator (7) through cab door (1) and slide regulator arm stud (8) into stationary

track (9).

NOTE

Regulator arm stud must be held in stationary track when

installing window regulator to inner door panel.

2. Install window regulator (7) on inner door panel (2) with four screws (3).

Install washer (4) and window regulator handle (5) on window regulator (7) with screw (6).

11-36