TM 9-2320-260-20
THIS TASK COVERS:
a. WeatherSeals Removal
d. Pillar Post Weatherseals Installation
b. Head Weatherseal Removal
e. Head WeatherSeal Installation
c. Pillar Post Weatherseals Removal
f. Weatherseals Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-260-10
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Adhesive (Appendix C, Item 2)
Parking brake set (TM 9-2320-260-10).
1. Remove five screws (12), clips (11), and weatherseal (13) from cab door (14). Clean weatherseal (13)
remains from cab door (14).
2. Remove weatherseal (10) from cab door (14). Clean weatherseal (10) remains from cab door (14).
I
b. Head Weatherseal Removal
1. Remove head weatherseal (4) from retainer (3).
2. Remove nine screws (2) and retainer (3) from cab soft top post (6).
1. Remove pillar post weatherseals (9), (15), and (8) from retainers (1), (17), and (5).
2. Remove twelve screws (7) and (16) and retainers (1), (17), and (5) from pillar post (18) and cab soft
top post (6).
1. Install retainers (l), (17), and (5) on pillar post (18) and cab soft top post (6) with twelve screws (7)
and (16).
2. Install pillar post weatherseal (9), (15), and (8) on retainers (1), (17), and (5).
1. Install retainer (3) on cab soft top post (6) with nine screws (2).
2. Install head weatherseal (4) on retainer (3).
1. Apply adhesive to mounting side of weatherseal (13) and cab door ( 14) mounting surface.
2. Install weatherseal (13) on cab door (14) with five clips (11) and screws (12).
3. Apply adhesive to mounting side of weatherseal (10) and cab door (14) mounting surface.
4. Install weatherseal (10) on cab door (14).
11-40
