TM 9-2320-260-20
THIS TASK COVERS:
a. Cab Door Removal
c. Cab Door Hinges Installation
b. Cab Door Hinges Removal
d. Cab Door Installation
lNITIAL SETUP
EQUIPMENT CONDITION
APPLICABLE MODELS
Parking brake set (TM 9-2320-260-10).
All
q
q Cab door handles and lock removed (para. 11-19).
MATERIALS/PARTS
q Cab door dovetail wedge removed (para. 11-13).
Two locknuts
q Cab door weatherseals removed (para. 11-20).
q Cab door window regulator and handle removed
REFERENCES (TM)
TM 9-2320-260-10
q Cab door check rod removed (para. 11-22).
TM 9-2320-260-20P
1. Remove two locknuts (6), washers (7), and hinge screws (1) from three mirror braces (2) and four
hinge leaves (4) and (8). Discard locknuts (6).
NOTE
Assistant will help with step 2.
2. Remove cab door (5) from hinge leaves (8).
Remove sixteen screws (3) and two hinge leaves (4) from cab door (5) and two hinge leaves (8) from
A-pillar (10) of cab (9).
Install two hinge leaves (4) on cab door (5) and two hinge leaves (8) on A-pillar (10) of cab (9) with sixteen
screws (3).
NOTE
Assistant will help with step 1.
1. Lift cab door (5) and aline two hinge leaves (4) with two hinge leaves (8) and three mirror braces (2).
2. Install two hinge screws (1) through three mirror braces (2) and four hinge leaves (4) and (8).
3. Install two washers (7) and new locknuts (6) on hinge screws (1).
11-32
