TM 9-2320-260-20
4-48. BATTERY CABLES AND CLAMPS REPLACEMENT (Contd)
d. Positive Cable Removal
1.
Loosen nut (10) and screw (8) and remove terminal clamp (9) from battery post (11).
2.
Remove nut (5), screw (7), and positive cables (4) and (6) from terminal clamp (9).
Loosen nut (15), screw (13), and remove terminal clamp (14) from battery post (16).
3.
4.
Remove nut (17), screw (12), and positive cable (4) from terminal clamp (14).
5.
Remove nut (19), screw (3), and clamp (18) from positive cable (6).
6.
Remove two screw-assembled lockwashers (40), clamps (39), positive cable (6), negative cable (41),
and accessory cable (33) from transmission top cover (42). Discard screw-assembled
lockwashers (40).
7.
Remove nut (48), lockwasher (47), and positive cables (6) and (45) from starter solenoid (46). Discard
lockwasher (47).
8.
Remove screw-assembled lockwasher (44), clamp (43), positive cable (6), negative cable (41), and
accessory cable (33) from engine (38). Discard screw-assembled lockwashers (44).
9.
Remove grommet (2) and positive cable (6) from frame rail (1).
e. Accessory Cable Removal
1.
Remove nut (10) and accessory cable (33) from terminal clamp (9).
2.
Loosen two nuts (31) and (24) and screws (30) and (29), and remove two terminal clamps (22) and
(27) from battery posts (32), (34), (35), and (36).
3.
Remove two nuts (20) and (25) and screws (23) and (28), and remove battery cables (21) and (26)
from two terminal clamps (22) and (27).
4.
Remove two screw-assembled lockwashers (40), clamps (39), accessory cable (33), positive cable (6),
and negative cable (41) from transmission top cover (42). Discard screw-assembled lockwashers (40).
5.
Disconnect accessory cable (33) from lead (37).
6.
Remove screw-assembled lockwasher (44), clamp (43), accessory cable (33), positive cable (6), and
negative cable (41) from engine (38). Discard screw-assembled lockwasher (44).
7.
Remove nut (19), screw (3), and clamp (18) from accessory cable (33).
8.
Remove grommet (2) and accessory cable (33) from frame rail (1)
