TM 9-2320-260-20
4-48. BATTERY CABLES AND CLAMPS REPLACEMENT (Contd)
c. Ground and Negative Cable Removal
Loosen nut (16) and screw (14) and remove terminal clamp (18) from battery post (15).
1.
2.
Remove nut (19), screw (17), and cable(s) (5) and (13) from terminal clamp (18).
3.
Remove nut (11) and negative cable (13) from screw (12).
4.
Remove locknut (6), screw (1), two lockwashers (2), ground cable (5), negative cable (4), and negative
slave cable (3) from frame (7). Discard locknut (6) and lockwashers (2).
5.
Remove locknut (8), screw (9), clamp (10), and negative cable (4) from frame (7). Discard
locknut (8).
6.
Remove three screw-assembled lockwashers (22), clamps (21), negative cable (4), positive cable (23),
and accessory cable (24) from transmission top cover (25) and engine (20). Discard screw-assembled
lockwashers (22).
7.
Remove nut (30), lockwasher (29), negative cable (4), ground cable (27), and ground strap (28)
from starter (26). Discard lockwasher (29).
4-92
