TM 9-2320-260-20
THIS TASK COVERS:
b. Lamp Installation
a. Lamp Removal
INITIAL SETUP
REFERENCES (TM]
APPLICABLE MODELS
TM 9-2320-260-10
M816, M819
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Two screw-assembled lockwashers
Parking brake set (TM 9-2320-260-10).
Three O-rings
q
Battery ground cable disconnected (para. 4-48).
1. Remove three screws (1), retaining ring (2), and three O-rings (3) from housing (7). Discard
o-rings (3).
NOTE
Tag all wires for installation.
2. Remove four springs (10) and lamp (4) from retaining ring (2).
3. Remove screw-assembled lockwashers (6) and (8) and wires (5) and (9) from lamp (4). Discard
screw-assembled lockwashers (6) and (8).
1. Install lamp (4) on retaining ring (2) with four springs (10).
2. Install wires (5) and (9) on lamp (4) with new screw-assembled lockwashers (6) and (8).
3. Install three new O-rings (3) and retaining ring (2) on housing (7) with three screws (1).
FOLLOW-ON TASKS: Connect battery ground cable (para. 4-48).
Check operation of floodlamp (TM 9-2320-260-10).
4-76
